An asphalt driveway is a type of driveway that is made from asphalt. Asphalt is a type of pavement that is made from a combination of asphalt cement and aggregate. The asphalt cement is a binder that is used to hold the aggregate together. The aggregate is a mixture of gravel, sand, and stone.
But how much does an asphalt driveway cost? If you’re interested to know more, we invite you to continue reading as we’re going to discuss this topic in today’s article.
Asphalt has been used in driveways for many years in the United States. The first use of asphalt in driveways was documented in the early 1900s. At that time, asphalt was beginning to be used more commonly in road construction and other projects. As a result, homeowners and businesses started using it for driveways and parking lots.
Nowadays, asphalt driveways are a popular choice for many homeowners because they are durable and require little maintenance. Asphalt driveways can last for many years, but they will eventually need to be replaced. Another reason why asphalt is a preferred material for driveway construction is because it is less expensive than concrete.
An asphalt driveway is typically 10 feet wide and 50 feet long, but can be customized to fit the needs of the home or business owner. The thickness of the asphalt can also vary, but is usually between 2 and 4 inches.
Factors That Affect The Overall Cost Of An Asphalt Driveway
There are a few factors homeowners should take into account when budgeting for an asphalt driveway: the size of the driveway, the thickness of the asphalt, and any prep work that may be needed.
The size of the driveway is important, as it will affect the amount of asphalt needed and the amount of labor required to install it. A smaller driveway will cost less than a larger one.
The thickness of the asphalt is also important. A thicker driveway will last longer and will be more durable, but it will also cost more.
Prep work is often necessary before an asphalt driveway can be installed. This may include grading the land or removing trees or shrubs. The cost of this work will depend on how much needs to be done.
In addition, homeowners should also be aware that the cost of an asphalt driveway may vary depending on their location. In general, driveways in colder climates will cost more than those in warmer climates, as the asphalt needs to be able to withstand extreme temperatures.
To be specific, the average cost of an asphalt driveway is between $3 and $5 per square foot. For a typical two-car driveway, this works out to a cost of between $6,000 and $10,000.
If you live in an area with a cold climate, you may need to factor in the cost of heating the driveway during the winter months. This can add an additional $1 to $2 per square foot to the total cost.
When having an asphalt driveway installed, it is important to use a qualified contractor who has experience with this type of work like Orlando’s trusted paving company, BaraCo Paving. The quality of the installation will have a big impact on how long the driveway lasts.
If you are thinking about having an asphalt driveway installed, be sure to get several quotes from different contractors to compare prices. You should also ask for references so you can check out the contractor’s previous work.
What If Special Additives Are Included Like Recycled Rubber Tires
Another plus to asphalt is that it can be enhanced with recycled rubber, which makes it even more environmentally friendly and long lasting. This can be done by either incorporating the recycled rubber into the asphalt mix itself or by applying a layer of rubberized asphalt over the top of the driveway.
The cost of an asphalt driveway with recycled rubber additives will vary depending on the size of the driveway, the location, and other factors. However, in general, you can expect to pay a bit more for an asphalt driveway with recycled rubber additives than you would for a traditional asphalt driveway.
The average price for an asphalt driveway with no additives ranges from $2-$4 per square foot. For a driveway with recycled rubber tires, you can expect to pay an additional $0.50-$1 per square foot, depending on the type of rubber used. And finally, if you hire a professional to install your driveway, you can expect to pay $0.50-$1.50 per square foot for labor.
Either way, this is a more expensive option and will increase the overall cost of the project.